Always there to help you
Register your product and get support at
DCM2260
Question?
Contact
Philips
User manual
Contents
8 Adjust sound
Select a preset sound effect
Adjust volume level
Mute sound
14
14
14
14
1 Safety
2
Know these safety symbols
Important safety instructions
Hearing safety
2
2
3
9 Other features
14
14
15
15
15
16
Use the alarm timer
Use the sleep timer
2 Your micro music system
Introduction
4
4
4
4
5
Listen to an external device
Listen through headphone
Charge your USB device
What's in the box
Overview of the main unit
Overview of the remote control
10 Product information
Specifications
16
16
17
17
17
3 Before use
7
7
7
7
USB playability information
Supported MP3 disc formats
Maintenance
Connect the FM antenna
Connect power
Install the remote control battery
11 Troubleshooting
18
4 Get started
Turn on
8
8
8
8
9
12 Notice
19
19
19
20
20
Set the clock
Select a source
Adjust the brightness of LCD display
Compliance
Care of the environment
Trademark notice
Copyright
5 Play from hard media
Play a disc
9
9
Play from a USB storage device
Control play
Program tracks
9
10
10
6 Use the dock
11
11
11
12
12
Compatible iPod/iPhone/iPad models
Enjoy audio through the dock
Charge your iPod/iPhone/iPad
Unload your iPod/iPhone/iPad
7 Listen to FM radio
13
13
13
13
13
Tune to an FM radio station
Program radio stations automatically
Program radio stations manually
Tune to a preset radio station
EN
1
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
1 Safety
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Read and understand all instructions before
you use this micro music system. If damage is
caused by failure to follow the instructions, the
warranty does not apply.
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Know these safety symbols
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, make sure that the power
voltage matches the value printed on the
back of the product. Never connect the
product to the power outlet if the voltage
is different.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electric
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
•
•
Never expose the remote control or
batteries to rain, water, sunshine, or
excessive heat.
Avoid force coming onto power plugs.
Loose power plugs can cause arcing or fire.
Risk of injury or damage to the product!
WARNING:To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
CAUTION:To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs:To prevent electric shock, match wide
blade to wide slot.)
•
•
•
•
Use only power supplies listed in the user
manual.
Visible and invisible laser radiation when
open.Avoid exposure to beam.
Do not touch the disc optical lens inside
the disc compartment.
Never place the product or any objects
on power cords or on other electrical
equipment.
•
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Important safety instructions
Risk of electric shock or fire!
Risk of overheating!
•
Never expose the product and accessories
to rain or water. Never place liquid
•
Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Make sure that curtains or other objects
never cover the ventilation slots on the
product.
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact the Consumer Care
to have the product checked before use.
•
2
EN
Risk of contamination!
To establish a safe volume level:
•
Remove the battery if it is exhausted or if
the remote control is not to be used for
an extended period of time.
Batteries contain chemical substances, they
should be disposed of properly.
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
•
Listen for reasonable periods of time:
•
Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
flames or heat.
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
•
Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
•
•
•
•
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Hearing safety
Note
• The type plate is located on the back of the product.
Listen at a moderate volume.
•
Using headphones at a high volume can
impair your hearing.This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute.The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
•
Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing.To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
EN
3
2 Your micro
music system
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Always there to help you
Register your product and get support at
Always there to help you
Register your product and get support at
DCM2260
Question?
Contact
Philips
Question?
Contact
Philips
Wall Mounting
Instructions
Short User Manual
If you contact the Consumer Care, you will
be asked for the model and serial number of
this apparatus.The model number and serial
number are on the rear of the apparatus.Write
the numbers here:
Overview of the main unit
Model No. __________________________
Serial No. ___________________________
abc d e
f
g h i
Introduction
With this product, you can:
•
enjoy audio from discs, USB storage
devices, iPod/iPhone/iPad, and other
external devices, and
•
listen to FM radio stations.
j
k l m
What's in the box
Check and identify the contents of the package:
•
•
•
•
•
•
•
•
Micro music system
Remote control (with one AAA battery)
AC power adaptor
Wall mounting kit (2 dowels and 2 screws)
FM antenna
Safety sheet
nop q
Short user manual
Wall mounting instructions
a
•
•
Turn on the product.
Switch the product to eco power
standby mode or normal standby
mode.
b SOURCE
Press repeatedly to select a source.
•
4
EN
c
d
q FM ANT
•
Start, pause, or resume play.
•
Connect to the FM antenna.
•
•
Stop the play of music.
Access the playlist of a docked iPod/
iPhone.
Overview of the remote
control
e
•
•
Connect a compatible USB storage
device for music play.
Connect a compatible USB device for
charging.
a
f Disc compartment
b
c
g
•
Press to eject the disc from the disc
compartment.
d
e
r
q
h
/
•
•
•
Skip to the previous or next track.
Press and hold to search within a track.
Tune to a radio station.
f
i VOL+/VOL-
•
Increase or decrease the volume level.
p
g
h
j Dock for iPod/iPhone/iPad
•
Connect to a compatible iPod/iPhone/
iPad.
o
n
m
k IR sensor
Receive infrared signals from the
remote control.
i
j
•
l Indicator
It lights red when the product is in the
eco power standby mode.
k
l
•
m LCD screen
n DC IN
•
Connect to the AC power adaptor.
o
•
Connect to a headphone with 3.5-mm
connector.
a
•
•
Turn on the product.
Switch the product to eco power
standby mode or normal standby mode.
p AUDIO IN
Connect to the audio output socket
•
(usually the headphone socket) of an
external device.
b
•
Eject the disc.
EN
5
c DOCK
Connect a compatible iPod/iPhone/
iPad for music play.
p
/MENU
•
•
•
Stop the play of music.
Access the playlist of iPod/iPhone.
d FM/ CD
Switch the source to FM tuner or the
disc in the disc compartment..
q OK
•
•
Confirm the current option.
r USB/AUDIO IN
Switch the source to USB storage
e PRESET/ALBUM
/
•
•
•
•
Skip to the previous or next album.
Select a preset radio station.
Navigate through iPod/iPhone playlist.
device or the audio input that is
transferred through the AUDIO IN
socket.
f
/
•
•
•
Skip to the previous or next track.
Press and hold to search within a track.
Tune to a radio station.
g +VOL -
•
Increase or decrease the volume level.
h
•
Start, pause, or resume play.
i REPEAT/SHUFFLE
Select a play mode.
•
j MUTE
•
Mute or restore volume.
k SOUND
•
Select a preset sound effect.
l CLOCK
•
Set the clock.
m TIMER/SLEEP
•
Set the alarm timer.
•
Set the sleep timer.
n PROG
•
Program radio stations.
•
Program tracks that are stored in a disc
or USB storage device.
o DISPLAY
•
In working mode, press to display the
current time.
•
In normal standby mode, press and
hold to adjust the brightness of LCD
display.
6
EN
3 Before use
Connect the FM antenna
DC IN
Note
• For optimal reception, fully extend the antenna and
adjust its position, or connect an outdoor antenna.
• This product does not support AM (amplitude
modulation) radio reception.
Connect the AC power adaptor between
•
•
the DC IN socket on the back panel, and
the power supply.
»
blinks.
Install the remote control
battery
a
c
b
Connect the FM antenna to the product.
Connect power
Note
1 Open the battery compartment.
2 Insert one AAA battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
• Before you connect the AC power cord, make sure that
you have completed all other connections.
EN
7
•
Press to switch this product
4 Get started
•
between the working mode and the
normal standby mode, or
•
from the eco power standby mode to
the working mode.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Set the clock
Always follow the instructions in this chapter in
sequence.
Note
• During setting, if no action is made within 90 seconds,
the product exits clock setting without saving earlier
operations.
Turn on
1 In standby mode, press and hold CLOCK
Press
.
to enter the clock setting mode.
» This product switches to the last
»
or
is displayed.
selected source.
2 Press +VOL - or
/
to select
or
•
, and then press CLOCK.
: 24-hour time format
: 12-hour time format
Switch modes
•
Automatically switch the modes:
» The hour digits begin to blink.
•
After this product stays inactive for 15
minutes, it automatically switches to the
normal standby mode.
3 Press +VOL -or to set the hour,
/
and then press CLOCK.
» The minute digits begin to blink.
» The clock is displayed.
» If the clock is not set,
blinks.
4 Press +VOL - or
/
to set the
•
After this product stays in the normal
standby mode for 15 minutes, it
automatically switches to the eco power
standby mode.
minute, and then press CLOCK.
» The set clock is displayed.
Tip
»
scrolls, and then the
LCD screen lights off.
• The product can synchronize its clock with a connected
iPod/iPhone/iPad.
» The LED indicator beside the LCD
screen lights in red.
Manually switch the modes:
•
Press and hold to switch this product
Select a source
•
from the working mode or normal
standby mode to the eco power
standby mode, or
On the product, press SOURCE repeatedly to
select a source.
•
from the eco power standby mode to
the normal standby mode.
•
•
: the playlist on the
connected iPhone/iPod/iPad
: the audio input through the
AUDIO IN socket
8
EN
•
•
: the disc in the disc compartment
: .mp3 files stored on the connected
USB storage device
: the FM tuner
5 Play from hard
media
•
You can also press source buttons on the
remote control to select a source.
•
•
•
FM/ CD: the FM tuner or the disc in the
disc compartment
DOCK: the playlist on the connected
iPhone/iPod/iPad
AUDIO IN/USB: the audio input through
the AUDIO IN socket, or the .mp3 files
stored on the connected USB storage
device
Play a disc
Note
• Make sure that the disc contains playable audio content.
Adjust the brightness of LCD
display
1 In normal standby mode, press and hold
DISPLAY until
,
, or
is
displayed.
2 Press VOL +/- or
/
to select
,
1 Press CD or SOURCE to switch the
, or
.
source to
.
2 Insert a disc into the disc compartment
with the printed side facing you.
»
Play starts automatically after a few
seconds.
» If play does not start automatically,
press to start play.
Play from a USB storage
device
This product can play .mp3 files that are copied
onto a compatible USB storage device.
•
•
•
Flash drive
Memory card reader
HDD: hard disc drive (This product can
detect only a portable HDD with USB
power peak current no more than 500 mA.)
EN
9
/
Skip to the previous or
next track.
Press and hold to rewind
a track or search forward
fast.
Note
• WOOX Innovations does not guarantee compatibility
with all USB storage devices.
• NTFS (NewTechnology File System) file system is not
supported.
/
Skip to the previous or
next album when one or
more albums exist.
REPEAT/SHUFFLE Select an available play
mode.
•
•
•
•
: repeat the
current track
: repeat all
tracks
: repeat the
current folder
: play tracks
randomly
To play tracks in
•
sequence, press
repeatedly until
REP and SHUF
disappear.
1 Connect the USB storage device to the
socket.
2 Press USB or SOURCE to switch the
source to
.
» Play starts automatically.
Program tracks
If play does not start automatically,
You can program a maximum of 20 tracks.
1 Press
2 Press
3 Press
/
to select a folder.
1 When no track is played, press PROG.
» The current track number blinks on
the display panel.
/
to select a file.
to start play.
2 Press
/
to select a track number.
3 Press PROG to confirm.
Control play
4 Repeat steps 2 and 3 to program more
tracks.
During play, follow the instructions below to
control play.
5 Press
to play the programmed tracks.
To erase the program, press twice.
•
Buttons
Functions
Pause or resume play.
Stop play.
10 EN
6 Use the dock
You can enjoy audio from iPod/iPhone/iPad
through this product.
Note
2 Eject the dock.
• There is no audio output from the headphone socket
of the connected iPod/iPhone/iPad.
Compatible iPod/iPhone/iPad
models
3 Turn the dock tray to select a connector
This product supports the following iPod,
iPhone, and iPad models.
that matches your iPod/iPhone/iPad.
•
iPod nano (2nd, 3rd, 4th, 5th, 6th, and 7th
generation)
iPod touch (1st, 2nd, 3rd, 4th, and 5th
generation)
iPod classic
iPhone 5
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPad mini
•
•
•
•
•
•
•
•
•
•
•
•
•
iPad 4th generation
iPad 3rd generation
iPad 2
iPad
Enjoy audio through the dock
1 Press DOCK or SOURCE to switch the
source to
.
EN 11
4 Connect your iPod/iPhone/iPad to the
dock.
1 Pull the iPod/iPhone/iPad out of the dock.
2 Press inside to hide the dock.
» Once the iPod/iPhone/iPad is
recognized, the charging starts.
5 Play a track on your iPod/iPhone/iPad.
Buttons
Functions
Start, pause, or resume play.
Access the playlist of iPod/iPhone.
Navigate through the playlist of
iPod/iPhone.
MENU/
/
/
Skip to the previous/next track.
Press and hold to rewind a track
or search forward fast.
Charge your iPod/iPhone/iPad
Once the iPod/iPhone/iPad is docked and
recognized, the charging starts.
Unload your iPod/iPhone/iPad
Note
• Risk of damage to the dock or your iPod/iPhone/iPad:
Do not twist or shake your iPod/iPhone/iPad during
unloading.
12 EN
7 Listen to FM
radio
Program radio stations
automatically
Note
• You can program a maximum of 20 preset radio
stations.
Tune to an FM radio station
Press and hold PROG until the frequency starts
to change.
Note
» All available stations are programmed
in the order of waveband reception
strength.
• Make sure that you have connected and fully extended
the FM antenna.
» The first programed radio station is
broadcast automatically.
Program radio stations
manually
Note
1 Press FM or SOURCE repeatedly to
• You can program a maximum of 20 preset radio
stations.
• To overwrite a programmed radio station, store
another one with its sequence number.
switch the source to
.
2 Press and hold
/
until the frequency
starts to change.
» The product automatically tunes to the
previous or next station with strong
reception.
1 Tune to a radio station.
2 Press PROG to activate programming.
» The sequence number blinks.
•
To tune to a station at a specific
frequency, press repeatedly
until its frequency is displayed.
/
3 Press
/
to allocate a sequence
number from 1 to 20 to this radio station,
and then press PROG to confirm.
» The preset sequence number and
the frequency of this radio station are
displayed.
Tip
• In FM mode, you can press
to switch the sound
setting between stereo and monophonic.
4 Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press
/
to select the sequence number of
the preset radio station.
EN 13
8 Adjust sound
9 Other features
The following operations are applicable to all
supported media.
Use the alarm timer
Select a preset sound effect
This product can be used as an alarm clock.
You can select the disc, iPod/iPhone/iPad library,
FM radio station, or .mp3 files stored on a USB
storage device as alarm source.
•
Press SOUND repeatedly to select a
preset sound effect.
•
DSC1, DSC2, DSC3, DSC4, and DSC5
Note
• Make sure that you have set the clock correctly.
• If the selected alarm source is unavailable, this product
switches to FM mode automatically.
Adjust volume level
•
On the remote control, press VOL +/-
repeatedly.
1 In normal standby mode, press and hold
SLEEP/TIMER.
•
On the main unit, press VOL+/VOL-
repeatedly.
» The alarm time is displayed with the
hour digits blinking.
» TIMER is displayed.
Mute sound
2 Press +VOL - or
/
repeatedly to
•
Press MUTE to mute or restore the sound.
set the hour, and then press SLEEP/TIMER
to confirm.
» The minute digits blink.
3 Press +VOL - or
/
to set the
minute, and then press SLEEP/TIMER to
confirm.
» The alarm source name blinks.
4 Press +VOL - or
/
to select an
alarm source.
5 Press SLEEP/TIMER to confirm.
»
XX (XX indicates the volume
level of alarm) blinks.
6 Press +VOL - to set the alarm volume, and
then press SLEEP/TIMER to confirm.
14 EN
Deactivate/Re-activate the alarm timer
Listen to an external device
In standby mode, press SLEEP/TIMER.
» If TIMER disappears, the alarm timer is
deactivated.
You can also listen to an external audio device,
for example, MP3 player, through this product.
» If TIMER is displayed, the alarm timer
is activated.
Stop an alarm
When an alarm rings, press or SLEEP/TIMER
to stop it.
AUDIO
IN
Note
• If you do not stop an alarm, it keeps ringing for 30
minutes, and then the product automatically switches to
normal standby mode.
1 Press AUDIO IN or SOURCE repeatedly
to switch the source to
.
Use the sleep timer
2 Connect an audio input cable with 3.5 mm
plug on both ends between
You can set a period of time after which the
product automatically switches to normal
standby mode.
In working mode, press SLEEP/TIMER
repeatedly to select a preset period (120, 90,
60, 45, 30, or 15 minutes).
•
the AUDIO IN socket on the back
panel of this product, and
the headphone socket on the external
device.
•
3 Play audio on the external device (refer to
» When the sleep timer is activated,
is displayed.
its user manual).
•
To deactivate the sleep timer, press
SLEEP/TIMER repeatedly until
is displayed.
Listen through headphone
Plug a headphone into the socket on the
front panel of main unit.
Note
• No audio output from the headphone socket when
you listen to the docked iPod/iPhone/iPad. Listen
through the speakers instead.
EN 15
10 Product
information
Charge your USB device
You can charge your USB device, for example,
smart phone, with this product.
Note
Note
• Product information is subject to change without prior
notice.
• The output voltage through the USB socket is 5V with
output currency 0.5 A.
• WOOX Innovations does not guarantee the
compatibility with all USB devices.
Connect your USB device to this product with
USB cable.
Specifications
General information
AC power adaptor
Model:AS360-120-
AE300 (Philips)
Input: 100 - 240V ~,
50/60 Hz, 1.2 A
Output: 12V 3.0 A
20 W
Operation power
consumption
Eco standby power
consumption
USB Direct
≤ 0.5 W
Version 1.1, 2.0
5V 500 mA
Max. loading of USB
output
Dimensions: Main unit
(W x H x D)
Weight
420 x 226 x 97 mm
- With packing
- Main unit
3.5 kg
2.3 kg
Amplifier
Maximum output power
Frequency response
Signal-to-noise ratio
AUDIO INPUT
2 X 10 W RMS
60 Hz - 16 kHz
≥ 60 dBA
650 mV RMS
20 kOhm
16 EN
•
Directory nesting up to a maximum of 8
levels
Disc
Laser type
Disc diameter
Support discs
Semiconductor
12 cm
•
•
•
•
Number of albums/ folders: maximum 999
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
CD-DA, CD-R,
CD-RW, MP3-CD
24 Bits, 44.1 kHz
< 1.5% (1 kHz)
60 Hz - 16 kHz
(44.1 kHz)
Audio DAC
Total harmonic distortion
Frequency response
Unsupported formats:
•
•
Empty albums: an empty album is an album
that does not contain .mp3 files, and will
not be shown in the display.
Unsupported file formats are skipped. For
example,Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
S/N Ratio
> 55 dB
Tuner (FM)
•
AAC,WAV, PCM audio files
Tuning range
Tuning grid
87.5 - 108 MHz
50 kHz
Sensitivity
< 22 dBf
Supported MP3 disc formats
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search selectivity
Total harmonic distortion < 3%
Signal-to-noise ratio
> 43 dBf
•
•
ISO9660, Joliet
> 28 dBf
Maximum track/file number: 999
(depending on file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
> 55 dB
•
•
Speakers
•
Supported bitrates: 32-320 kbps, variable
bitrates
Speaker impedance
Speaker driver
Sensitivity
6 Ohm
2.75'' full range X 2
> 83 dB/m/W
Maintenance
Clean the cabinet
USB playability information
•
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Compatible USB devices:
•
•
•
USB flash memory (USB 2.0 or USB1.1)
USB flash players (USB 2.0 or USB1.1)
Memory cards (requires an additional card
reader to work with this unit)
Clean discs
When a disc becomes dirty, clean it with
•
a cleaning cloth.Wipe the disc from the
centre out.
Supported formats:
•
USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32 - 320 kbps and
variable bit rate
•
EN 17
11 Troubleshooting
Warning
• Never remove the casing of this product.
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.
Clean the disc lens
•
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
Problem
Solution
No power.
Make sure that the AC power
adaptor is connected properly.
Make sure that there is power
at the AC outlet.
With a power-saving feature,
the product switches off
automatically 15 minutes after
the product stays inactivity.
Adjust the volume.
No sound
or poor
sound.
Disconnect the headphones.
No response Reconnect the AC power
from the
product.
adaptor, and then turn on the
product again.
With a power-saving feature,
the product switches off
automatically 15 minutes after
the product stays inactivity.
18 EN
Problem
Remote
Solution
12 Notice
Before you press any function
control does button, select the correct
not work.
source with the remote control
instead of the main unit.
Reduce the distance between
the remote control and the
main unit.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Insert the battery with its polarity
(+/– signs) aligned as indicated.
Replace the battery.
Compliance
Aim the remote control directly
at the sensor on the front panel
of the main unit.
No disc is
detected.
Insert a disc.
Make sure that you place the
disc with its label facing upwards.
Wait until the moisture
condensation at the lens has
cleared.
This product complies with the radio
interference requirements of the European
Community.
This apparatus includes this label:
Replace or clean the disc.
Make sure that the recordable
disc is finalized and the format
supported.
USB storage Make sure that the USB storage
device is not device is compatible with the
Class II equipment symbol:
supported.
product.
Try another one.
Cannot
Make sure that the file format is
play some
files on the
USB storage
device.
supported.
Make sure that the file quantity
does not exceed the maximum.
CLASS II apparatus with double insulation, and
no protective earth provided.
Radio
reception is
poor.
Increase the distance between
the product and other electrical
appliances.
Care of the environment
Fully extend the antenna.
Connect an outdoor FM
antenna instead.
Timer does
not work.
Set the clock correctly.
Activate the timer.
Power has been interrupted
or the AC power adaptor has
been disconnected.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Clock/timer
setting is
erased.
Reset the clock/timer.
EN 19
Trademark notice
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
“Made for iPod,”“Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specifically to
iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet
Apple performance standards.Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Copyright
2014 © WOOX Innovations Limited.All rights
reserved.
Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.”
Specifications are subject to change without
notice.WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
20 EN
Specifications are subject to change without notice.
2014 ©WOOX Innovations Limited.All rights reserved.
This product was brought to the market byWOOX Innovations Limited or one of its affiliates, further
referred to in this document asWOOX Innovations, and is the manufacturer of the product.WOOX
Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
DCM2260_12_UM_V2.0
|