Table of Contents
Preface ...............................................................................................................................1
Chapter 1 Installation........................................................................................................2
Unpacking............................................................................................................................................. 2
Viewing Angle Adjustment................................................................................................................... 2
Detaching LCD Monitor from Its Stand................................................................................................ 2
Interface for Arm Applications ............................................................................................................. 3
Cable Installation .................................................................................................................................. 3
Connecting the Display to your Computer ............................................................................................ 3
Connecting the AC Power ..................................................................................................................... 3
Setting Up the LCD Monitor................................................................................................................. 3
Power Management System .................................................................................................................. 4
Chapter 2 Display Controls ...............................................................................................4
User Controls ........................................................................................................................................ 4
Adjusting the Monitor's Display............................................................................................................ 4
Function Description............................................................................................................................. 5
Chapter 3 Technical Information .....................................................................................6
Specifications........................................................................................................................................ 6
Standard Timing Table.......................................................................................................................... 8
Troubleshooting .................................................................................................................................... 8
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice. This document contains proprietary information
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
1
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be
performed by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD
Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
*
*
*
Monitor to PC signal cable is frayed or damaged.
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
LCD Monitor or the case is damaged.
7. A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and a device
weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.
Chapter 1 Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the
Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
*
LCD Monitor
*
User's Manual
*
Monitor-to-PC VGA Cable
*
Power Cord
If you find that any of these items is missing or appears damaged, contact your dealer immediately.
Viewing Angle Adjustment
The LCD Monitor is designed to allow users to have a
comfortable viewing angle. The viewing angle can be
adjusted from -5°to +25°.(See fig. 1-1)& Left / Right
-45° to +45°
Figure 1-1
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in
damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull
downo the second.
Figure 1-2
2
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-2.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches
threaded nuts, as well as four 5 mm access holes in the plastic covering
as illustrated in Figure 1-3. These specifications meet the VESA Flat
Panel Monitor Physical Mounting Interface Standard (paragraphs
2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
Figure 1-3
Cable Installation
Please follow these instructions to install the cables.
1. Remove the back panel n from the rear of the monitor.(See Fig.
1-4)
2. Place the signal cable, the AC power cable into their correct
Socket.
Figure 1-4
Connecting the Display to your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA port
(See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port on your
PC.
4. Make sure connection are secure.
Figure 1-5
Attention
This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-core
interface cable is included in the LCD Monitor package.
This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used.
Connecting the AC Power
1. Connect the power cord to the AC socket.(See Fig. 1-6)
2. Connect the power cord to an AC power source.
Figure 1-6
Setting Up the LCD Monitor
1. Turn on the LCD monitor’s hard power switch, located on the
back of the monitor (See Fig. 1-7)
2. Turn on the LCD Monitor's soft power switch, located on the
bezel of the monitor.
Figure 1-7
3
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
Chapter 2 Display Controls
User Controls
A brief description and the location of all LCD Monitor function controls and indicators:
Figure 2-1
Press the Soft power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
1
2
Soft Power Switch
Power-On Indicator
Press either left or right control button for OSD (On Screen Display) menu
selection.
3
4
Function Select Buttons
Adjustment Control
Buttons
Press the left button to decrease the OSD setting and press the right
button to increase the OSD setting.
Adjusting the Monitor's Display
The monitor has four function control buttons to select among functions shown on OSD menu, designed for
easy user-viewing environments.
OSD Function Menu
To access OSD Main menu, simply press one of the Function
Select control buttons, and the menu diagram will pop up on
the screen as shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll
through the entire menu items ,then press Adjustment Control
buttons to adjust content of selected item.
Figure 2-2
Attention
Firmware revision may have been updated into a latest version while the version number shown on all OSD
menus in this manual will stay as Ver. 1.00.
4
Function Description
Icon
Function
Brightness
Contrast
Function Description
101 scales of brightness are available to choose from (0 to 100).
101 scales of contrast are available to choose from (0 to 100).
H. Position
V. Position
This function let's you adjust the display's horizontal position
This function let's you adjust the display's vertical position.
This function let's you select the images sharpness. Five selections are
available. A smoother setting is more suitable for pictures, while a sharper
setting is more suitable for text.
Sharpness
This function let's you set the transparency of the OSD menu. The
transparency is adjustable from 0% to 100%. 11 scales are available.
A total of 256 scales (0 to 255) are available to adjust the focus and clarity of the
display.
OSD Transparency
Phase
This function carries a frequency-tracking feature that offers users better
stability and clarity. 101 scales (from -50 to +50) are available on the mode
that is currently running. The adjustable range can be variable in different
modes. This function records the deviated number of clock period between
input timing and supported timing. The clock value may not be”0” after Auto
Adjustment when the input timing is different from supported timing.
Clock
Push the ( ) button to select a different color temperature. Please see the
diagram below for function and description.
Color Temperature
OSD H. Position
OSD V. Position
This function moves the OSD menu window horizontally.
This function moves the OSD menu window vertically.
Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400
70Hz, are the same, this function let's you manually select either 640 x 400
(graphics mode), or 720 x 400 (text mode).
Graph / Text
Recall
The recall function will return all adjusted parameters to factory preset values.
Five OSD language options are available: English, German, French, Spanish,
and Italian. Press the left or right adjustment control button to select other
language.
Language
Press
button ( ) to activate the Auto Adjustment function.
The Auto Adjustment function let you adjust the display size, clock and phase
to obtain the best viewing settings. This process will take 3 ~ 5 seconds to
complete. Attention : After Auto Adjustment, the display might display
wrong position or size, if it has received a pattern which has no screen border.
Auto
Exit
Saves the values of this setting and exits the OSD menu function.
Icon
Function
Description
Sets the CIE coordinate color temperature to 9300°K
CIE coordinated Color Temperature of 9300°K
CIE coordinated Color Temperature of 7500°K
CIE coordinated Color Temperature of 6500°K
9300
7500
6500
Sets the CIE coordinate color temperature to 7500°K
Sets the CIE coordinate color temperature to 6500°K
Sets the settings to a by user defined CIE Temperature.
Three colors (Red, Green, Blue) can be
adjusted from the OSD menu
User
5
Chapter 3 Technical Information
Specifications
Fujitsu
LCD Panel
Size
19" (48 cm)
Display Type
Resolution
Active matrix color TFT LCD
1280 x 1024
Display Dot
Display Area (mm)
Display Color
Brightness
Contrast Ratio
Response Time
Lamp Voltage
Lamp Current
Viewing Angle
1280 x (RGB) x 1024
376.32 x 301.056 (H x V)
16.7M
300 cd/m2 (typical)
700:1 (typical)
Ta=25°C Tr=15ms Tf=10ms
750 Vrms (typical)
7.0 mA rms. (typical)
Vertical: -85° ~ +85°
Horizontal: -85° ~ +85°
Video
Input Signal
Input Impedance
Polarity
Analog RGB 0.7Vp-p
75 Ohm ± 2%
Positive, Negative
Amplitude
0 - 0.7 ± 0.05 Vp
Multi-mode Supported
Horizontal Frequency: 24 ~ 80 KHz
Vertical Frequency: 56 ~ 75 Hz
Control
Power switch (hard and soft types)
On/Off switch with LED indicator
OSD
Brightness
Digital
Contrast
Digital
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Clock
Digital
Display Mode Setup
OSD Format
Use EEPROM to save settings in memory
20 characters x 9 rows
Power Management
Mode
On
Off
Power Consumption*
50W maximum
AC Input
LED Color
Green
Yellow
240 VAC
240 VAC
240 VAC
3W maximum
3W maximum
Soft switch off
Dark
Yellow: Standby, Suspend, Off
Dark: Power off
Disconnected
3W maximum
240 VAC
1W maximum
1W maximum
100 VAC
240 VAC
DARK
Hard switch off
* Meeting VESA DPMS requirements measured from AC Input.
6
Sync Input
Signal
Separate TTL compatible horizontal and vertical synchronization
Polarity
Positive and negative
Plug & Play
Supports VESA DDC2B functions
External Connection
Power Input (AC input)
Video Cable
Power cord
15-pin D-sub connector
Environment
Operating Condition:
Temperature
Relative Humidity
Temperature
5°C to 40°C/41°F to 104°F
20% to 80%
-20°C to 60° C/-4°F to140° F
Storage Condition:
Relative Humidity
5% to 85%
Power Supply (AC Input)
Input Voltage
Input Current
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.2 A maximum
Size and Weight
Dimensions
Net Weight
433 (W) x 447 (H) x 235 (D) mm
7.0 ± 0.3 kg
Gross Weight
9.0 ± 0.3 kg
Pin Assignment
6
Signal
Signal
Description
PIN
Description
PIN
1
2
3
4
5
6
7
8
Red
Green
Blue
Digital GND
Digital GND
Red Rtn
Green Rtn
Blue Rtn
9
+5V
Hot Plug Detect
NC
11
1
5
10
11
12
13
14
15
SDA
H. Sync.
V. Sync.
SCL
15
10
7
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
H. Freq.
(KHz)
31.469
24.830
31.469
31.50
V. Freq.
(Hz)
70.087
56.420
70.087
70.15
Pixel Freq.
(MHz)
25.175
21.050
25.175
25.197
25.175
30.24
31.500
31.500
28.322
36.000
40.000
50.000
49.500
57.2832
65.000
71.664
75.000
78.750
80.00
H/V Sync.
Polarity
+/-
Resolution
Mode
VGA-350
NEC PC9801
VGA-400-GRAPH
NEC PC9821
VGA-480
APPLE MAC-480
VESA - 480 - 72Hz
VESA - 480 - 75Hz
VESA-400-TEXT
SVGA
VESA-600-60 Hz
VESA-600-72 Hz
VESA-600-75 Hz
APPLE MAC-800
XGA
640 x 350
640 x 400
640 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
-/-
-/+
-/-
-/-
-/-
-/-
-/-
-/+
+/+
+/+
+/+
+/+
-/-
-/-
+/+
-/-
+/+
-/-
+/+
+/+
31.469
35.00
59.940
66.67
37.861
37.500
31.469
35.156
37.879
48.077
46.875
49.725
48.363
53.964
56.476
60.023
60.04
72.809
75.000
70.087
56.250
60.317
72.188
75.000
74.55
60.004
66.132
70.069
75.029
75.02
COMPAQ-XGA
VESA-768-70 Hz
VESA-768-75 Hz
APPLE MAC-768
SXGA
63.981
79.976
60.020
75.025
108
135
SXGA
Note: .When the in put display mode is not 1280 x 1024, the image is smoothly expanded to 1280 x 1024 dots with the gm2120 scaling
engine. After expansion from 650x350, 640x400, 640x480, 720x400, 832x624, 800x600, and 1024x768 resolution, the text may
look not so sharp, and the Graphics may look not so proportional.
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various
VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new
VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps :
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on
the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment Control
button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with
a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the
LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the
VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 24 ~ 80 KHz
and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that is supported by your
LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message
“No Input Signal”.
8
|