Wireless Telephone Quick Reference Guide
Mitel SX50/200/2000
Superset 420
SpectraLink 6020 Wireless Telephone
Superset 420
On/Off Press and hold END. Two
chirps on, one chirp off
The diagram above shows how the Superset 420 keypad
corresponds to the Wireless Telephone.
Make a call Press START to get dial tone.
The Wireless Telephone user will press LINE then 1-9 to
access Line Select Keys 1-9. Press LINE then * to access
the Superkey functions.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
FCN followed by * on the Wireless Telephone is equivalent
to using the left softkey, FCN 0 equals the middle softkey,
and FCN # equals the right softkey.
Answer Press HOLD to put your current
second call call on hold, or END to hang up.
Press LINE + the digit that is
Function Key
Strokes
Default
Settings
Fill In Your
Feature Settings
flashing.
FCN + 1
FCN + 2
FCN + 3
FCN + 4
FCN + 7
FCN + 8
FCN + 9
FCN + *
FCN + 0
FCN + #
FCN + *
LINE + 0
MUTE
XFER/CONF
REDIAL
Hold Press HOLD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
MSG
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
Left Softkey
Center Softkey
Right Softkey
Superkey
settings.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
CANCEL
1725-36154-001_E Superset is a trademark of Mitel Networks Corporation
For technical support, please contact
your facility’s Network Administrator.
|